KingKure 90CR
Chlorinated rubber concrete curing and sealing compound.
Technical Properties @ 25°C
| Colour | Specific Gravity | Solids by volume: | Curing time: BS 8110 |
|---|---|---|---|
|
Clear & red |
0.90 ± 0.05 for clear colour
0.95 ± 0.05 for red colour
|
14 ± 1 for clear colour
17 ± 1 for red colour
|
1 hr @ 20oC and 50% relative humidity |
Application
Method of Use
Packaging
KingKure 90CR is applied for newly cast concrete and cementitious surfaces to retain sufficient moisture to ensure full hydration of the cement. Typical application areas include:
- Freshly laid concrete floors.
- Internal coating for walls.
- Old concrete substrates.
- Industrial floors with light traffic.
- Cement based renders and toppings should not be applied over KingKure 90CR.
- When subjected to traffic conditions, reviving coats should be applied as required.
- When subjected to UV radiation, KingKure 90CR may slightly yellow.
- KingKure 90CR is not resistance to oxidizing agents, concentrated acids, oils, fats and solvents.
- KingKure 90CR should not be applied were negative water pressure is expected.
KingKure 90CR is available in 25 litre pails and 200 litre drums.