KingKure 80W should be spray applied as soon as
possible to the fresh concrete, provided that the
surface water has evaporated.
Do not apply if bleed water is forming, or is present
on the concrete surface.
Stir KingKure 80W well before use to ensure even
pigment dispersion. KingKure 80W should be spray
applied, the spray nozzle should be held
approximately 450 mm from the concrete surface
and passed back and forth to ensure complete
coverage. Pump pressure should be maintained to
give an even, fine spray.
The applied film should be protected from rain for at
least 3 hours; care should be taken to ensure that
the film is not broken.
In case of formed concrete, KingKure 80W should
be applied immediately after de-shuttering. In such
a case the concrete surface must be dampened
with clean water prior application of KingKure 80W.
Dry surfaces may prevent correct film formation and
cause absorption of the KingKure 80W into the
concrete surface, which may lead to staining and
difficulty in later degradation and removal.