KingKure 70W should be spray applied as soon as
possible to the fresh concrete, provided that the
surface water has evaporated.
Do not apply if bleed water is forming, or is present
on the concrete surface. Stir KingKure 70W well
before use to ensure even pigment dispersion.
KingKure 70W should be spray applied, the spray
nozzle should be held approximately 450 mm from
the concrete surface and passed back and forth to
ensure complete coverage. Pump pressure should
be maintained to give an even, fine spray.
The applied film should be protected from rain for at
least 3 hours; care should be taken to ensure that the
film is not broken.
In case of formed concrete, KingKure 70W should be
applied immediately after de-shuttering. In such a
case the concrete surface must be dampened with
clean water prior application of KingKure 70W. Dry
surfaces may prevent correct film formation and
cause absorption of the KingKure 70W into the
concrete surface, which may lead to staining and
difficulty in later degradation and removal.