One component, polyurethane elastomeric waterproofing membrane
Easily applied by brush, squeegee blade or airless spray.
Fast curing.
Excellent adhesion to almost any surface.
Excellent thermal resistance and service temperatures.
Stable at a wide temperature range.
Excellent mechanical properties, high elongation, high tensile and tear strength, high abrasion resistance.
Thixotropic consistency, easily applied on vertical surface and complex shapes without running or bubbling.
As a pitch based system, it gives an excellent chemical resistance.
Provides a uniform, joint free, seamless membrane.
UV stable, does not harden or become brittle.
Good oxidation stability.
Can be easily repaired if damaged.
* Vertical and horizontal substrates.
* Roofs.
* Cementitious substrates.
* Wet areas and irrigation channels.
* Bathrooms.
* Bitumen membranes (for repair also).
* Foundations.
* Closed spaces with high humidity like planters.
ASTM C836
1.6 – 1.8 kg/m² to give 1.2 mm dry film thickness
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult KingKrete’s Technical Services Department.
KingProof PP100 is available in 20 kg buckets. KingProof Reflect silver colour is available in 5 and 25 litre buckets.
Kingproof Scrim is available in 1 m x 100 LM rolls. KingProof Primer P is available in 5 and 25 litre buckets.
