High flow non-shrink cementitious pile top fairing and void filling grout
Non-shrink grout that has dual expansion properties to compensate for shrinkage in both the plastic and hardened stages.
Extremely dense and low permeability.
High early strength development allowing for rapid installation.
High flow can be poured or pumped into variable gap widths.
Easy to apply, single component which require only addition of water.
Hydrogen and chloride free.
* Designed for pile cap reprofiling and as a general void filling.
* Applied between 15 and 250 mm thick. Greater thicknesses can be achieved, depending on the gap design and the steel volume. In conditions at or below the water table.
BS1881
BS6319
BS4550
ASTM C827-87
1 bag will give 12 liters
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature.
Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult KingKrete’s Technical Services Department.
KingGrout PCC50 is available in 25 kg bags.
