General purpose water repellent impregnation based on solvent borne Silane/Siloxane
Deep penetration into substrate.
Excellent reduction of water and chloride intrusion.
Excellent resistance to alkalis and UV light.
Absorbed by the substrate, does not form film and hence does not change or stain the substrate.
Increases considerably freeze thaw resistance.
Minimizes efflorescence.
Breathable, allows for water vapour release.
Excellent resistance to dust and dirt pick-up.
* KingCoat L provides very good water repellency
and protection from weathering to vertical or
steeply sloping concrete, mineral-based natural
and artificial stone, cementitious substrates, and mineral paints.
* KingCoat L can also be used for injection into
walls to prevent rising damp.
* KingCoat L can be used as a moisture barrier and primer for exterior paints.
EN 1504-2
0.1 – 0.4 litre/m² depends on the porosity of the substrate
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult KingKrete’s Technical Services Department.
KingCoat L is available in 20 litre pails and 200 litre drums.
