Water repellent impregnation based on water borne silicone
Good penetration into substrate.
Provides excellent water repellency to a wide variety of substrates.
Excellent reduction of water intrusion.
Excellent resistance to UV light.
Increases considerably freeze thaw resistance.
Minimizes efflorescence.
Breathable, allows for water vapour release.
Very good resistance to dust and dirt pick-up.
* KingCoat K provides outstanding early water
repellency and protection from weathering to
natural stones, clays, terracotta, bricks,
sandstone, limestone, aerated concrete,
insulating materials, gypsum and gypsum-based fiber boards.
* KingCoat K is also suitable to be applied
immediately on manufactured low-fired clay
products such as roof tiles, floor tiles, and flower pots.
VOC < 10 g/ltr
ASTM C642
0.1 – 0.4 litre per m² depends on the porosity of the substrate
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult KingKrete’s Technical Services Department.
KingCoat K is available in 20 litre plastic pails and 200 litre plastic drums.
