Liquid polymer slurry coat with gluing additive
Successfully increases the bonding/adhesion of any subsequent coatings.
Improved mechanical and physical properties by increasing tensile, flexural and adhesive strengths.
Good freeze/thaw resistance.
Chloride free.
* Bonding of new to old concrete when used as a
slurry coat.
* To produce various traditional cement/sand
adhesive mortars such as block mortar,
plaster/render and tile adhesive.
* To produce a mechanical key prior to rendering of various plaster mixes on concrete, brick and block surfaces.
5, 25 and 200 Kits
Shelf life is 1 year when stored under cover, out of direct sunlight and protected from extremes of temperature.
Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult KingKrete’s Technical Services Department.
KingBond TBG100 is available in 5, 25 and 200 Kits.
