Polyurethane resin based injection system
Excellent bond strength to concrete, brickwork, and masonry.
Low viscosity polyurethane system, formulated to allow cracks penetration.
Rapid reaction with water; will stop water leakage problems.
Outstanding resistance to hydrostatic pressure.
Used with KingInject 80PU1 120 to form a permanently elastic seal.
Exhibit good chemical resistance.
Non-toxic, suitable for use in contact with potable water.
* Injection of wet cracks in all types of structural
concrete elements, masonry, and brickwork.
BS 6920
5.5 kg (5 litre) packs
Approximately 2.0 – 2.5 m2/ltr per coat. However, coverage may vary depending on the surface porosity, size, and quantity of cracks present in the area being treated. Two coats may be necessary for very porous surfaces.
KingInject 80PU1 is available in 1.1 kg (1 litre) and 5.5 kg (5 litre) packs.
